Upgrading to an epoxy floor shouldn’t be a mystery. At PalmGuard Epoxy, we follow a proven, six-phase system that delivers a peel-proof finish in as little as 24 hours. Whether you’re coating a 200 sq ft single-car garage in Tampa or a 1,200 sq ft showroom in Clearwater, the workflow stays the same—transparent, efficient, and backed by our lifetime adhesion warranty.
Phase 1 — Free On-Site Quote & Moisture Test
- Concrete inspection: We measure cracks, existing coatings, and slab hardness.
- Digital moisture reading: In-slab RH probe identifies vapor levels (> 75 % RH triggers a moisture-vapor barrier).
- Color & texture design: Choose flake blend, metallic pigment, or quartz.
- Detailed written quote: Itemized scope, square-foot pricing, and projected install date.
Typical timeline: 30-minute visit. You receive the quote within 24 hours.
Phase 2 — Surface Prep & Crack Repair
| Step | Why It Matters | Equipment |
|---|---|---|
| Diamond grinding (CSP-2/3) | Creates mechanical profile for maximum bond | 21” planetary grinder + HEPA vac |
| Crack & joint filling | Prevents telegraphing and moisture seepage | Fast-set polyurea filler |
| Oil & silica wipe-down | Removes contaminants that cause delamination | Industrial degreaser + microfiber |
Proper prep is the #1 reason PalmGuard floors outlast DIY kits and many competitors.
Phase 3 — Primer / Moisture-Vapor Barrier
- 100 % solids epoxy primer penetrates the open pores and seals micro-cracks.
- MVB epoxy is applied when RH levels exceed 75 %—critical for Florida slabs.
- Cure time: 30–60 minutes (fast-dry formula).
Phase 4 — Build Coat & Decorative Layer
Flake Systems
- Pigmented build coat rolled at 10–12 mils.
- Full broadcast of vinyl flakes for color, camouflage, and slip texture.
Metallic Systems
- Self-leveling epoxy infused with metallic pigments for 3-D depth.
- Artistic swirling technique ensures a one-of-a-kind finish.
Phase 5 — UV-Stable Polyaspartic Clear Coat
- Applied at 10–12 mils for chemical and hot-tire resistance.
- Optional aluminum-oxide grit meets OSHA slip standards for pool decks and entryways.
- Touch-dry in 60 minutes; light foot traffic at 4 hours; vehicle traffic after 24–48 hours.
Phase 6 — Final Walk-Through & Lifetime Warranty
- Client inspection: Verify gloss, color, and uniform flake coverage.
- Maintenance kit: pH-neutral cleaner + microfiber mop.
- Digital warranty: Lifetime adhesion guarantee emailed same day.
- Before/after photos: Added to our Facebook portfolio (https://www.facebook.com/palmguardepoxy) for proof of craftsmanship.
Typical Install Timeline (400 sq ft Garage)
| Day | Task | Hours on-site |
|---|---|---|
| Day 1 AM | Grind, crack repair, moisture test confirmation | 2–3 h |
| Day 1 PM | Primer + build coat + flake/metallic layer | 2–3 h |
| Day 2 AM | Clear coat + walk-through | 1–2 h |
| Drive-on | After 24–48 h cure | — |
Why Tampa Bay Homeowners Choose PalmGuard Epoxy
- Lifetime adhesion warranty—no peeling, no flaking, guaranteed.
- Fast 2-day turnaround even in high humidity, thanks to polyaspartic chemistry.
Ready to experience the PalmGuard difference? Click “Get Quote” or call (813) 364-4584 to lock in our $899 Summer Garage Special before July 4ᵗʰ.
Trusted Epoxy Flooring & Coating Experts in Tampa Bay
At PalmGuard Epoxy, we deliver long-lasting, chemical-resistant, and low-maintenance epoxy floors across Tampa, St. Petersburg, and Clearwater. Whether it’s a garage, commercial space, or boat deck, our coatings are built for Florida’s climate and your lifestyle.
✓ Durable Flooring
✓ Three Year Warranty